| 产品描述： |
全自动吹瓶机@自强机械：ZQ-A系列吹瓶机是我公司最新研制的一种二步法手插瓶胚自动吹瓶设备，最大可吹制0.6L,1.5L，5L。适用于吹制以PET、PP等结晶型塑料为原料的任何形状的碳酸饮料瓶、矿泉水瓶、农药瓶、化妆品瓶、耐高温瓶及其他包装容器。 ZQ-A手插瓶胚系列与其它全自动上瓶坯系列相比，最大的区别在于：ZQ-A无自动输送机，无自动输送瓶坯（管坯），只能用人工手插瓶坯。手插式设计的最大优点：最大程度的降低了机器的生产成本；较半自动吹瓶机报废率低，生产速度快，性能稳定，而且操作极其简单。将代替半自动吹瓶机。 机器机特点:
A、采用先进的微电脑控制系统，性能稳定；
B、采用红外线灯管加温，穿透力强，瓶坯自转受热，轨道公转，加热均匀，快速可靠；
C、加热区内的灯管、反射板宽度及高度均可调节，以适合不同结构的瓶坯的加温，并有自动排温装置，以保证烘道的恒温；
D、每个机械动作都有安全自锁装置，当某个工序出现故障时，程序将自动切换到安全状态；
E、各动作由气缸驱动，不采用油泵，具有无污染，噪音低等优点；
F、气路设计将动作和吹气分为三部份，以满足吹瓶、动作不同气压的需求；
G、采用高压及双曲臂连杆锁模，锁模力强；
H、操作方法有手动、自动两种方式；
I、安全可靠独特的阀位设计，更是让气路变得一目了然；
J、生产工艺流程全部自动化完成，具有投资省、效率高、操作方便、维修简单、安全等优点。
K、冷却系统达到理想的冷却效果
L、安装，启动简单
M、成瓶报废率低于0.2% ZQ-A series, newly developed by our company, is a two-step automatic blow-molding machine, which requires labor to put performs into the preheater only. ZQ-A series is of one cavity and the maximum cavity of the bottles is 0.6L,1.5L,5L. It can blow various bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET, PP etc. Compared with other full-automatic series, ZQ-A series has no automatic conveyer, so it can’t transfer performs automatically, but requires labors to put performs into preheater. The distinctive feature of the ZQ-A is as follows: it has saved the cost to the maximum extent; it has lower rejection rate, higher production, and more stable performance than the semi-automatic one, and moreover, it is easy to run. Therefore, it will take the place of the semi-automatic blow-molding machine. Settings:
a).PLC colour display: OMRON(JAPAN)
b).Pneumatic parts:FESTO(GERMANY)
c).Controller of preform transfer:Servo motor National(JAPAN)
d).Other electric parts are all world-famous brand Features:
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: less than 0.2 percent. E-mail:Jessica@tincoo.com MSN: zhangyechina@hotmail.com SKYPE:zhangyewyh http://www.cnziqiang.com |
